NSN 5306-01-183-6984
Close Tolerance Hex Head Bolt
Between 1.076 inches and 1.123 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number VS3191-5-10 for national stock number 5306011836984.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-183-6984.
-
MPN or Model
VS3191-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.076 inches and 1.123 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-510-5285 MPN 15263V3-10Machine Screw
- 5305-01-134-9361 MPN SC2671-4-9Machine Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-512-8414 MPN 3M1170D3-7AFClose Tolerance Screw
- 5306-01-165-3286 MPN VFK600-5D14Shear Bolt
- 5306-01-331-3106 MPN VCG0016-6-42Shear Bolt
- 5306-01-350-0647 MPN VCG0037-6-20Close Tolerance Bolt
- 5306-01-398-1334 MPN VAL22034-5G15Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-183-6984 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3191-5-10 | Arconic Global Fasteners & Rings, |
S397-5-10 | Huck International, Inc. |
VCG0002-5-10 | Valley-todeco, Inc. |
AIC688-5-10 | Sps Technologies, Llc |
PBF 1266-5-10 | Sps Technologies, Llc |
MB155-5-10 | Hi-shear Corporation |
122896-5-10 | Sps Technologies, Llc |
ST3M747-5-10 | Boeing Company, The |
MB155-5-10 | Lisi Aerospace Canada Corp |
ST3M747-5-10 | Heartland Precision Fasteners, Inc. |
ST3M747-5-10 | Fastener Innovation Technology, Inc. |
S397-5-10 | Huck Intl Inc |
10116115 | Nimikkeistokeskus Ncb Finland |
VS3191-5-10 | Alcoa Global Fasteners, Inc. |
GS1031-5-10 | B & B Specialties Inc. |