NSN 5306-01-184-3770
Coaxial Connector
Between 0.797 inches and 0.827 inches fastener length, double hexagon w/hole head style, 0.234 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number LD111-0021-0405 for national stock number 5306011843770.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-184-3770.
-
MPN or Model
LD111-0021-0405
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.485 inches and 0.515 inches -
Fastener Length
Between 0.797 inches and 0.827 inches -
Head Style
Double hexagon w/hole -
Head Height
0.234 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-099-2722 MPN 168-58801-3Hydra Line Assembly
- 1680-00-523-7057 MPN 265-524071-11Bell Crank
- 1560-01-121-4702 MPN 192-43839-10Aircraft Fairing
- 1560-01-148-1971 MPN L3005992-021Aircraft Access Cover
- 1560-01-179-6699 MPN L1201025-032Aircraft Access Door
- 4920-01-183-2353 MPN 45A91000-001Aircraft Maintenance Fixture
- 1680-01-183-5098 MPN L5238046-003Reaction Cylinder Sleeve
- 1560-01-189-2617 MPN L1203370-001Aircraft Structural Plate
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-184-3770 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0405 | Boeing Company, The |