NSN 5306-01-184-5137
Wheel Bolt
Hole in end of fastener countersunk to 0.250 in. Dia. And 90.0 deg.; 0.094 in. Dia. Hole centered on adjacentflats.
Manufacturer part number 12321125 for national stock number 5306011845137.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-184-5137.
-
MPN or Model
12321125
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
10.530 inches -
Head Style
Hexagon -
Head Height
0.390 inches -
Width Between Flats
0.880 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
11 -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5626, cond. Anneal military specification single material response or mil-s-6049, cond. Anneal military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, class 3, type i federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-316-7803 MPN 8713604Inductive Wire Wound Fixed Resistor
- 5930-00-501-0087 MPN 7064455Thermostatic Switch
- 4820-00-600-1463 MPN 7998633Check Valve
- 5930-00-705-7487 MPN 7057487Toggle Switch
- 5935-01-113-1103 MPN 12273145-2071Plug Dummy Connector
- 5935-01-119-0309 MPN 12310107Connector Adapter
- 5975-01-139-9749 MPN 12306836Electrical Cable Protector
- 5935-01-347-6114 MPN 12324397-13Connector Adapter
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-184-5137 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12321125 | U S Army Tank Automotive Command |
Stock Check
- NE: 57
- NS: 1