NSN 5306-01-185-2203
Wheel Bolt
Between 0.845 inches and 0.875 inches fastener length, distorted head head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number MS35764-836 for national stock number 5306011852203.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-185-2203.
-
MPN or Model
MS35764-836
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.720 inches and 0.875 inches -
Fastener Length
Between 0.845 inches and 0.875 inches -
Head Style
Distorted head -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Locking Feature
Distortions head -
End Application
Spec item -
Thread Diameter
0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-018-3310 MPN MS3106A20-11PElectrical Plug Connector
- 5930-00-036-8716 MPN MS27734-22Toggle Switch
- 5935-00-042-3662 MPN MS24264R18T31SNElectrical Receptacle Connector
- 5940-00-082-4664 MPN MS27249-4B5Terminal Board
- 5935-00-153-7455 MPN MS18168-2YElectrical Receptacle Connector
- 5935-00-204-7604 MPN MS27484T8A6PElectrical Plug Connector
- 5935-00-244-8765 MPN MS27484T14B37SElectrical Plug Connector
- 5935-00-259-0046 MPN MS3106B18-22PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-185-2203 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35764-836 | Military Standards |
MS35764-836 | Military Standards |