NSN 5306-01-185-2804
Coaxial Connector
2.766 inches fastener length, hexagon head style, between 0.125 inches and 0.137 inches head height, width between flats: between 0.928 inches and 0.945 inches .
Manufacturer part number 75A613076-2001 for national stock number 5306011852804.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-185-2804.
-
MPN or Model
75A613076-2001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
2.766 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.137 inches -
Width Between Flats
Between 0.928 inches and 0.945 inches -
Grip Diameter
Between 0.7430 inches and 0.7435 inches -
Shank Unthreaded Hole Diameter
0.140 inches first hole and 0.146 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 2.100 inches and 2.110 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.544 inches first hole -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel -
Material Specification
Ams 6411 assn standard single material response -
Surface Treatment
Chromium grip -
Surface Treatment Specification
Ps13102 class b, fscm 76301 mfr ref single treatment response grip -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-032-6136 MPN 32-11011-336Aircraft Spar
- 1560-00-039-5095 MPN 53-32522-15Aircraft Skin
- 4920-00-075-9398 MPN AJ32-18502-1TDAircraft Maintenance Alignment Jig
- 1560-00-088-9038 MPN 32-80200-3Canopy Handle Arm
- 1680-00-208-3710 MPN 68A620029-1003Bell Crank
- 1560-00-249-8837 MPN 68A327152-2003Actuator Support Beam
- 1560-00-253-9345 MPN 68A311134-2005Aircraft Skin
- 1560-00-295-2331 MPN 53-42001-63Door Assembly Clip
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-185-2804 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
75A613076-2001 | Boeing Company, The |