NSN 5306-01-185-2846
Close Tolerance Hex Head Bolt
Between 6.013 inches and 6.043 inches fastener length, hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6308U88 for national stock number 5306011852846.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-185-2846.
-
MPN or Model
NAS6308U88
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.503 inches and 0.553 inches -
Fastener Length
Between 6.013 inches and 6.043 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 5.490 inches and 5.510 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6308 professional/industrial association standard
More from these suppliers
- 5940-00-143-5147 MPN NAS1388-1Conductor Splice
- 5975-00-709-9429 MPN NAS622CT3Electrical Clamp Hook
- 5940-01-042-8839 MPN NAS705D2Stud Terminal
- 5940-01-381-7092 MPN NAS1063B226-235Terminal Board Marker Strip
- 5305-00-006-6574 MPN MS90725-600Hexagon Head Cap Screw
- 5305-00-012-0719 MPN NAS1635-00-8Machine Screw
- 5305-00-020-3624 MPN NAS1100-6-6Machine Screw
- 5305-00-021-7468 MPN MS27039-4-46Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-185-2846 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308U88 | National Aerospace Standards |