NSN 5306-01-185-4604
Wheel Bolt
Between 0.444 inches and 0.510 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number MS21095-4010 for national stock number 5306011854604.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-185-4604.
-
MPN or Model
MS21095-4010
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.079 inches and 1.125 inches -
Fastener Length
Between 0.444 inches and 0.510 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Locking Feature
Patch threads -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-7398 MPN NAS1063C8-302Terminal Board Marker Strip
- 5940-01-381-7272 MPN NAS1063B168-179Terminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-9894 MPN NAS1102E04-10PMachine Screw
- 5305-00-088-9668 MPN MS24693-C54Machine Screw
- 5305-00-145-8351 MPN MS24694A3Machine Screw
- 5305-00-171-2561 MPN NAS1123E12Close Tolerance Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-185-4604 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21095-4010 | National Aerospace Standards |
MS21095-4010 | Military Standards |