NSN 5306-01-186-2154
Coaxial Connector
Nas6303u52(d) ; (d)=drilled hole in shank.
Manufacturer part number NAS6303U52D for national stock number 5306011862154.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-186-2154.
-
MPN or Model
NAS6303U52D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 3.558 inches and 3.588 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 3.240 inches and 3.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-591-8613 MPN AS85049/38-13WElectrical Connector Backshell
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-058-9391 MPN MS51977-76Setscrew
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-088-9666 MPN MS24693-C51Machine Screw
- 5305-00-144-0376 MPN NAS662C2LLR3Socket Head Cap Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
- 5305-00-225-7776 MPN MS16996-26Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-186-2154 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303U52D | National Aerospace Standards |