NSN 5306-01-186-3172
Coaxial Connector
Between 1.080 inches and 1.096 inches fastener length, double hexagon head style, between 0.422 inches and 0.454 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number GB511EC4D11 for national stock number 5306011863172.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-186-3172.
-
MPN or Model
GB511EC4D11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.382 inches and 0.418 inches -
Fastener Length
Between 1.080 inches and 1.096 inches -
Head Style
Double hexagon -
Head Height
Between 0.422 inches and 0.454 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 type 2, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-008-3631 MPN 123WM10008-501Main Beam Wing Section Support
- 1560-00-018-2335 MPN 128WM10198-2Wing Fitting
- 5940-00-052-1207 MPN GR540H1CGrounding Metallic Shielded Cable Ferrule
- 1560-00-064-9383 MPN 128P10531-1Shroud Assembly
- 1560-00-066-6316 MPN 123P10323-19Aircraft Access Door
- 1560-00-091-3159 MPN 89P1050-3Cowl Channel Assy
- 1560-00-165-6470 MPN 86025Elevator Yoke Assembly
- 5935-00-174-0098 MPN GK802AN1Electrical Connector Polarizing Key
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-186-3172 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511EC4D11 | Northrop Grumman Systems Corporation |
GB511EC | Northrop Grumman Systems Corporation |
79895D-4-11 | Sps Technologies, Llc |
79895D-4-11 | Sps Technologies, Llc |