NSN 5306-01-186-8583
Close Tolerance Hex Head Bolt
Between 1.641 inches and 1.661 inches fastener length, double hexagon head style, between 0.383 inches and 0.389 inches width between flats, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number S406-3D22 for national stock number 5306011868583.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-186-8583.
-
MPN or Model
S406-3D22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.256 inches and 0.296 inches -
Fastener Length
Between 1.641 inches and 1.661 inches -
Head Style
Double hexagon -
Width Between Flats
Between 0.383 inches and 0.389 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5306-00-332-4561 MPN VAL23033-12-32Close Tolerance Bolt
- 5306-00-582-8963 MPN 336C553P1Shoulder Bolt
- 5306-00-762-2903 MPN VFK100G-06022Shear Bolt
- 5306-00-921-0858 MPN VFK100G-04036Shear Bolt
- 5306-00-960-5454 MPN BACB30LM3DU-8Shear Bolt
- 5306-01-042-8830 MPN GB511B9-36Shear Bolt
- 5306-01-141-7183 MPN ST3M497-6-14Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-186-8583 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S406-3D22 | Huck International, Inc. |
VS3174-3D22 | Arconic Global Fasteners & Rings, |
VCG0001-3D22 | Valley-todeco, Inc. |
AIC687-3D22 | Sps Technologies, Llc |
PBF1265-3D22 | Sps Technologies, Llc |
MB154-3D22 | Hi-shear Corporation |
122895-3D22 | Sps Technologies, Llc |
MB154-3D22 | Lisi Aerospace Canada Corp |
ST3M744-3D22 | Alcoa Global Fasteners, Inc. |
ST3M744-3D22 | Boeing Company, The |
S406-3D22 | Huck Intl Inc |
VG0001-3D22 | Valley-todeco, Inc. |
VS3174-3D22 | Alcoa Global Fasteners, Inc. |