NSN 5306-01-187-0632
Wheel Bolt
0.875 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: 0.375 inches .
Manufacturer part number MS9558-10 for national stock number 5306011870632.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-187-0632.
-
MPN or Model
MS9558-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.767 inches and 0.787 inches -
Fastener Length
0.875 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
0.375 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
0.070 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.088 inches and 0.108 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-038-6320 MPN MS27501B17CElectrical Connector Cover
- 5935-00-044-4101 MPN MS90362-2Electrical Connector Cover
- 5905-00-058-1770 MPN MS35834-395Film Fixed Resistor
- 5935-00-061-2476 MPN MS3100K18-12SElectrical Receptacle Connector
- 5930-00-081-6114 MPN MS24658-21PToggle Switch
- 4820-00-081-7134 MPN MS28884A-6Check Valve
- 5935-00-086-2403 MPN MS3116P20-16PElectrical Plug Connector
- 5905-00-185-6966 MPN MS35043-200Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-187-0632 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9558-10 | Military Standards |