NSN 5306-01-188-1658
Coaxial Connector
Between 1.753 inches and 1.783 inches fastener length, double hexagon w/hole head style, 0.322 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number LD111-0021-0618 for national stock number 5306011881658.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-188-1658.
-
MPN or Model
LD111-0021-0618
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.618 inches and 0.668 inches -
Fastener Length
Between 1.753 inches and 1.783 inches -
Head Style
Double hexagon w/hole -
Head Height
0.322 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-040-8595 MPN 192-33347Longeron
- 1560-00-117-3088 MPN 55-22028Elevator Trim Tab
- 1560-00-250-7092 MPN 265-321200-127Aircraft Structural Plate
- 1560-00-328-3446 MPN 165-42141-231Engine Shroud Assy
- 1560-00-401-2607 MPN 265-530045-5Trim Panel Retainer
- 1680-00-966-9924 MPN 6014-101Seat Cushion Assy
- 4920-01-164-0392 MPN R-TBD-565Aircraft Maintenance Fixture
- 1560-01-164-6017 MPN L2100001-011Horizontal Stabilizer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-188-1658 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0618 | Boeing Company, The |