NSN 5306-01-189-0026
Coaxial Connector
Between 3.594 inches and 3.624 inches fastener length, spline extended washer head style, 0.311 inches head height, width between flats: 0.703 inches .
Manufacturer part number 76754-9-44 for national stock number 5306011890026.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-189-0026.
-
MPN or Model
76754-9-44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.859 inches -
Fastener Length
Between 3.594 inches and 3.624 inches -
Head Style
Spline extended washer -
Head Height
0.311 inches -
Width Between Flats
0.703 inches -
Extended Washer Diameter
0.933 inches -
Extended Washer Thickness
0.133 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
2.750 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-i-6868 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5212 MPN 73573-96-9Socket Head Cap Screw
- 5305-00-347-7830 MPN LS15265V4-5Close Tolerance Screw
- 5305-00-347-7840 MPN LS15265V3-17Close Tolerance Screw
- 5305-00-460-3042 MPN 106363-3-2Machine Screw
- 5305-00-503-5591 MPN NAS1131E2Close Tolerance Screw
- 5305-00-567-6059 MPN NAS1189-04P7LKHSocket Head Cap Screw
- 5305-00-574-0225 MPN GB511DU3-4Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-189-0026 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
76754-9-44 | Sps Technologies, Llc |
76754-9-44 | Sps Technologies, Llc |