NSN 5306-01-189-3773
Close Tolerance Hex Head Bolt
Between 2.786 inches and 2.806 inches fastener length, dished hexagon head style, between 0.282 inches and 0.297 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number MS27576-9-32 for national stock number 5306011893773.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-189-3773.
-
MPN or Model
MS27576-9-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.510 inches and 0.686 inches -
Fastener Length
Between 2.786 inches and 2.806 inches -
Head Style
Dished hexagon -
Head Height
Between 0.282 inches and 0.297 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 2.000 inches and 2.016 inches -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.661 inches first hole and 2.691 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-2999 MPN NAS1063B1-17Terminal Board Marker Strip
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5935-01-649-0263 MPN EN6093-01VElectrical Receptacle Connector
- 5305-00-007-1550 MPN NAS1131C96PClose Tolerance Screw
- 5305-00-071-2214 MPN MS35274-67Machine Screw
- 5305-00-150-3089 MPN NAS1100C08-7PMachine Screw
- 5305-00-151-5795 MPN MS35206-320Machine Screw
- 5305-00-165-8087 MPN MS16995-1BSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-189-3773 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-9-32 | National Aerospace Standards |
MS27576-9-32 | Military Standards |