NSN 5306-01-189-8422
Wheel Bolt
Between 4.875 inches and 4.922 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10C46 for national stock number 5306011898422.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-189-8422.
-
MPN or Model
AN10C46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.923 inches and 1.000 inches -
Fastener Length
Between 4.875 inches and 4.922 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 3.922 inches and 3.952 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.656 inches first hole and 4.686 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-3259 MPN AN3102E20-16PElectrical Receptacle Connector
- 5305-00-150-9220 MPN AN503-10-16Machine Screw
- 5305-00-151-0090 MPN AN515-5-3Machine Screw
- 5305-00-156-2856 MPN AN505-4R18Machine Screw
- 5305-00-167-2926 MPN AN531-10R14Tapping Screw
- 5305-00-180-0033 MPN AN500A10-48Machine Screw
- 5305-00-271-8199 MPN AN507B832R10Machine Screw
- 5305-00-282-0170 MPN AN507C832R10Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-189-8422 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10C46 | Aeronautical Standards Group |