NSN 5306-01-190-2203
Close Tolerance Hex Head Bolt
With retaining element on shank.
Manufacturer part number MS27576-9-27 for national stock number 5306011902203.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-190-2203.
-
MPN or Model
MS27576-9-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.510 inches and 0.686 inches -
Fastener Length
Between 2.474 inches and 2.494 inches -
Head Style
Dished hexagon -
Head Height
Between 0.282 inches and 0.297 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 1.688 inches and 1.704 inches -
Thready Qty Per Inch (tpi)
18 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.359 inches first hole and 2.369 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-8506 MPN NAS1063B50-51Terminal Board Marker Strip
- 5940-01-393-9188 MPN NAS1063A15TB105ALTerminal Board Marker Strip
- 5305-00-006-2410 MPN NASM51105Hexagon Head Cap Screw
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
- 5305-00-008-9113 MPN NAS1190C02T4LSocket Head Cap Screw
- 5305-00-026-2370 MPN NAS1352-03-6Socket Head Cap Screw
- 5305-00-051-2336 MPN NASM51958Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-190-2203 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-9-27 | National Aerospace Standards |
MS27576-9-27 | Military Standards |