NSN 5306-01-191-1414
Coaxial Connector
Between 0.917 inches and 0.946 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, width between flats: between 0.360 inches and 0.375 inches .
Manufacturer part number MS21134H05006 for national stock number 5306011911414.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-191-1414.
-
MPN or Model
MS21134H05006
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.541 inches -
Fastener Length
Between 0.917 inches and 0.946 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Width Between Flats
Between 0.360 inches and 0.375 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty ii cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-779-8222 MPN NAS1196-13Electrical Connector Shell
- 5940-01-425-6509 MPN NAS1063A5-442Terminal Board Marker Strip
- 5305-00-050-9215 MPN MS24667-52Socket Head Cap Screw
- 5305-00-074-2699 MPN NAS1156-17Machine Screw
- 5305-00-143-9567 MPN NAS1608-24RShoulder Screw
- 5305-00-478-9922 MPN NAS1189-4T8LSocket Head Cap Screw
- 5305-00-531-0447 MPN NAS335CFA12Close Tolerance Screw
- 5305-00-543-5801 MPN MS24677-111Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-191-1414 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134H05006 | National Aerospace Standards |
MS21134H05006 | Military Standards |