NSN 5306-01-191-2453
Coaxial Connector
Between 2.659 inches and 2.689 inches fastener length, round w/wrench flats chamfered head style, 1.380 inches head diameter, head height: 0.400 inches .
Manufacturer part number L3300205-003 for national stock number 5306011912453.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-191-2453.
-
MPN or Model
L3300205-003
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.079 inches and 1.109 inches -
Fastener Length
Between 2.659 inches and 2.689 inches -
Head Style
Round w/wrench flats chamfered -
Head Diameter
1.380 inches -
Head Height
0.400 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Grip Diameter
Between 0.7445 inches and 0.74895 inches -
Shank Unthreaded Hole Diameter
0.144 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
1.580 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.375 inches first hole -
Surface Finish
16.0 microinches grip -
Material
Steel -
Material Specification
H+9-4-30 fscm 43999 mfr ref single material response -
Surface Treatment
Chromate -
Surface Treatment Specification
La0109-019 fscm 43999 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-150-7751 MPN 55-52515-3Elev Wheel Assembly
- 1560-00-570-3588 MPN 152-31813Canopy Track Plate
- 1560-00-696-1516 MPN 172-54064Electrical Console Panel Shield
- 4920-01-157-1549 MPN L8181008-101Test Program Set
- 4920-01-157-5925 MPN 45A36000Aircraft Components Test Set Subassembly
- 1560-01-164-5985 MPN L6312253-005Aircraft Structural Component Support
- 1560-01-166-1135 MPN L2100164-021Aircraft Trailing Edge
- 4920-01-185-6363 MPN 13B65000-001Nose Landing Gear Lifting Bridle
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-191-2453 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
L3300205-003 | Boeing Company, The |