NSN 5306-01-193-0144
Coaxial Connector
Between 2.406 inches and 2.436 inches fastener length, double hexagon w/hole head style, 0.355 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0021-0727 for national stock number 5306011930144.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-193-0144.
-
MPN or Model
LD111-0021-0727
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.708 inches and 0.758 inches -
Fastener Length
Between 2.406 inches and 2.436 inches -
Head Style
Double hexagon w/hole -
Head Height
0.355 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
1.688 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-030-5181 MPN 170-25009-51Aircraft Channel
- 1560-00-449-3582 MPN 265-522052-31Bias Bungee Support
- 1560-00-572-2709 MPN 187-51098-20Pitot Tube Boom Assembly
- 1560-00-796-8011 MPN 265-430019Switch Housing Assembly
- 4920-01-142-5629 MPN R-TBD-95Hori Load Lock Assembly-limiting
- 4920-01-142-9245 MPN 46A24000-001Test Adapter Set
- 4920-01-165-9233 MPN R-TBD-571Aircraft Maintenance Adapter Set
- 1560-01-175-1940 MPN L6310129-011Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-193-0144 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0727 | Boeing Company, The |