NSN 5306-01-193-2374
Coaxial Connector
Between 2.093 inches and 2.123 inches fastener length, double hexagon w/hole head style, 0.355 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0021-0722 for national stock number 5306011932374.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-193-2374.
-
MPN or Model
LD111-0021-0722
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.708 inches and 0.758 inches -
Fastener Length
Between 2.093 inches and 2.123 inches -
Head Style
Double hexagon w/hole -
Head Height
0.355 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-040-8595 MPN 192-33347Longeron
- 1560-00-476-1605 MPN 265-523068Bellcr Support Assy
- 1560-00-792-0997 MPN 265-130918-22Aircraft Structural Component Support
- 1560-00-834-0048 MPN 265-948254Pressure Fuel Servicing Adapter
- 1560-01-148-1031 MPN 192-47048Bracket Assy
- 4920-01-157-2410 MPN 14A70000-001Test Program Set
- 5935-01-176-0275 MPN LE482-0032-1001Electrical Connector Backshell
- 5935-01-193-5489 MPN ES27484T22F35SElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-193-2374 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0722 | Boeing Company, The |