NSN 5306-01-193-6795
Wheel Bolt
Between 1.293 inches and 1.323 inches fastener length, spline drive shear head head style, 0.257 inches head height, head minor diameter: between 0.514 inches and 0.521 inches .
Manufacturer part number VS3133L7-10 for national stock number 5306011936795.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-193-6795.
-
MPN or Model
VS3133L7-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.658 inches and 0.708 inches -
Fastener Length
Between 1.293 inches and 1.323 inches -
Head Style
Spline drive shear head -
Head Height
0.257 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-462-2725 MPN 3M1169V3-9AClose Tolerance Screw
- 5305-01-497-0841 MPN 3M1170C3-12AClose Tolerance Screw
- 5305-01-508-9326 MPN 3M1169C5-11AClose Tolerance Screw
- 5306-00-594-7664 MPN VAL23033-3-10Close Tolerance Bolt
- 5306-00-823-4792 MPN 756514-101Shoulder Bolt
- 5306-01-044-6563 MPN VEH160271-3M-10Close Tolerance Bolt
- 5306-01-249-4187 MPN ST3M744-3-11Close Tolerance Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-193-6795 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3133L7-10 | Arconic Global Fasteners & Rings, |
VCG0009L7-10 | Valley-todeco, Inc. |
AIC596L7-10 | Sps Technologies, Llc |
PBF7521L-10 | Sps Technologies, Llc |
PBF7521L7-10 | Sps Technologies, Llc |
120978L7-10 | Sps Technologies, Llc |
C7521L7-10 | Huck International, Inc. |
120978L7-10 | Sps Technologies, Llc |
C7521L7-10 | Lockheed Martin Corporation |
120978-7-10-S5 | Sps Technologies, Llc |
VS3133L7-10 | Alcoa Global Fasteners, Inc. |