NSN 5306-01-193-6824
Coaxial Connector
Between 1.128 inches and 1.158 inches fastener length, double hexagon w/hole head style, 0.322 inches head height, width between flats: between 0.639 inches and 0.649 inches .
Manufacturer part number LD111-0021-0608 for national stock number 5306011936824.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-193-6824.
-
MPN or Model
LD111-0021-0608
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.618 inches and 0.668 inches -
Fastener Length
Between 1.128 inches and 1.158 inches -
Head Style
Double hexagon w/hole -
Head Height
0.322 inches -
Width Between Flats
Between 0.639 inches and 0.649 inches -
Extended Washer Diameter
Between 0.491 inches and 0.507 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 ph13-8 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-123-4450 MPN 44-33534-2Landing Gea Fitting
- 1560-00-244-4675 MPN 165-31854-1Aircraft Windshield Panel
- 1560-00-521-4203 MPN 140-61173Gun Tube Assembly
- 1680-00-570-4587 MPN 191-52220-7Reaction Cylinder Assembly
- 1560-00-795-8518 MPN 246-33565-1Landing Gear R Link
- 1560-00-797-5461 MPN 265-335555-1Uplock Arm Assembly
- 1680-01-035-1379 MPN 223-54708-11Ram Assembly
- 1680-01-157-9292 MPN L5272049-001Push-pull Control Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-193-6824 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0608 | Boeing Company, The |