NSN 5306-01-193-6825
Coaxial Connector
Between 1.253 inches and 1.283 inches fastener length, double hexagon w/hole head style, 0.322 inches head height, width between flats: between 0.639 inches and 0.649 inches .
Manufacturer part number LD111-0021-0610 for national stock number 5306011936825.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-193-6825.
-
MPN or Model
LD111-0021-0610
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.618 inches and 0.668 inches -
Fastener Length
Between 1.253 inches and 1.283 inches -
Head Style
Double hexagon w/hole -
Head Height
0.322 inches -
Width Between Flats
Between 0.639 inches and 0.649 inches -
Extended Washer Diameter
Between 0.491 inches and 0.507 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5619 ph13-8 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-040-8680 MPN 192-43007Engine Powe Support
- 4920-00-098-2444 MPN E2083Test Plug Assembly
- 1680-00-186-0599 MPN 140-34545Bell Crank
- 5930-00-536-0662 MPN NA5-7865-1ASensitive Switch
- 4920-01-142-6562 MPN 41A27000-001Altitude Pressu Test Adapter Set
- 4920-01-157-5918 MPN 51A15000-001Aircraft Components Test Set Subassembly
- 4820-01-166-4151 MPN L5871061-003Valve Retainer
- 5930-01-170-2135 MPN LE452-0005-2003Toggle Switch
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-193-6825 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0610 | Boeing Company, The |