NSN 5306-01-193-9032
Close Tolerance Hex Head Bolt
Between 2.006 inches and 2.047 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 73586D-6-24 for national stock number 5306011939032.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-193-9032.
-
MPN or Model
73586D-6-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.496 inches and 0.557 inches -
Fastener Length
Between 2.006 inches and 2.047 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.825 inches first hole and 1.845 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-4036 MPN NAS1101-3H7Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-054-6287 MPN C7984-4-10PClose Tolerance Screw
- 5305-01-161-6165 MPN AIC4040V4-04RClose Tolerance Screw
- 5305-01-329-9961 MPN AIC4414-3-16Machine Screw
- 5305-01-465-2407 MPN TX1027V4-12AClose Tolerance Screw
- 5305-01-497-0061 MPN TX1027C4-11ATolera Close Screw
- 5305-01-512-8325 MPN TX1027C5-14AFClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-193-9032 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
73586D-6-24 | Spectron Development Laboratories |
73586D-6-24 | Sps Technologies, Llc |
73586D-6-A24 | Sps Technologies, Llc |
LE111-0064-0624 | Boeing Company, The |
AIC3586-6-24 | Sps Technologies, Llc |