NSN 5306-01-195-0054
Coaxial Connector
Between 1.765 inches and 1.795 inches fastener length, spline extended washer head style, between 0.194 inches and 0.234 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number ST3M753-4-21 for national stock number 5306011950054.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-195-0054.
-
MPN or Model
ST3M753-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.493 inches -
Fastener Length
Between 1.765 inches and 1.795 inches -
Head Style
Spline extended washer -
Head Height
Between 0.194 inches and 0.234 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-251-6370 MPN BACB30LU4-41Close Tolerance Screw
- 5306-01-046-1193 MPN VAL23033-4X10Shoulder Bolt
- 5306-01-054-3416 MPN VCG0009-4-10Shear Bolt
- 5306-01-054-3422 MPN C7521L6-19Shear Bolt
- 5306-01-056-1493 MPN BACB30MT5T20Shear Bolt
- 5306-01-142-8367 MPN VAL23607-5D72Shoulder Bolt
- 5306-01-424-9558 MPN VCG0037-6-24Shear Bolt
- 5306-01-476-6936 MPN VCG0001-6D36Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-195-0054 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M753-4-21 | Boeing Company, The |
VS3190-4-21 | Arconic Global Fasteners & Rings, |
ST3M753-4-21 | Fastener Innovation Technology, Inc. |
ST3M753-4-21 | Sps Technologies, Llc |
VFK600-4-21 | Valley-todeco, Inc. |
AIC763-4-21 | Sps Technologies, Llc |
PBF1267-4-21 | Sps Technologies, Llc |
MB156-4-21 | Hi-shear Corporation |
MB156-4-21 | Lisi Aerospace Canada Corp |
S343-4-21 | Huck Intl Inc |
ST3M753-4-21 | Arconic Global Fasteners & Rings, |
122897-4-21 | Sps Technologies, Llc |
122897-4-21 | Sps Technologies, Llc |
VS3190-4-21 | Alcoa Global Fasteners, Inc. |
S343-4-21 | Huck International, Inc. |
GS1032-4-21 | B & B Specialties Inc. |