NSN 5306-01-195-1584
Coaxial Connector
Between 1.641 inches and 1.671 inches fastener length, spline extended washer head style, between 0.194 inches and 0.234 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number VS190-4-19 for national stock number 5306011951584.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-195-1584.
-
MPN or Model
VS190-4-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.493 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Spline extended washer -
Head Height
Between 0.194 inches and 0.234 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.318 inches and 0.324 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-166-6140 MPN BACB30LU4-21Close Tolerance Screw
- 5305-01-365-0409 MPN BACB30LR6-43Close Tolerance Screw
- 5305-01-417-2492 MPN 3M1169V3-6AClose Tolerance Screw
- 5305-01-462-2840 MPN 3M1169V4-9AClose Tolerance Screw
- 5306-00-324-7716 MPN VAL23033-12-82Close Tolerance Bolt
- 5306-01-023-9062 MPN GB511H-8-46Shear Bolt
- 5306-01-046-0508 MPN VAL23608-4D15Shoulder Bolt
- 5306-01-054-3406 MPN C7521-4-7Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-195-1584 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS190-4-19 | Alcoa Global Fasteners, Inc. |
S343-4-19 | Huck International, Inc. |
VFK600-4-19 | Valley-todeco, Inc. |
ST3M753-4-19 | Boeing Company, The |
VS3190-4-19 | Arconic Global Fasteners & Rings, |
ST3M753-4-19 | Alcoa Global Fasteners, Inc. |
AIC763-4-19 | Sps Technologies, Llc |
PBF1267-4-19 | Sps Technologies, Llc |
MB156-4-19 | Hi-shear Corporation |
122897-4-19 | Sps Technologies, Llc |
MB156-4-19 | Lisi Aerospace Canada Corp |
S343-4-19 | Huck Intl Inc |
VS3190-4-19 | Alcoa Global Fasteners, Inc. |
HP7753-4-19 | Heartland Precision Fasteners, Inc. |
SLB255-4-19 | Space-lok, Inc. |
GS1032-4-19 | B & B Specialties Inc. |
ST3M753-4-19 | Houston Precision Fasteners I, Lp |
122897-4-19 | Sps Technologies, Llc |
ST3M753-4-19 | Fastener Innovation Technology, Inc. |