NSN 5306-01-195-1597
Close Tolerance Hex Head Bolt
Between 2.645 inches and 2.686 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 73586D-5-35 for national stock number 5306011951597.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-195-1597.
-
MPN or Model
73586D-5-35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.447 inches and 0.508 inches -
Fastener Length
Between 2.645 inches and 2.686 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.471 inches first hole and 2.491 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-1816 MPN NAS1132V2Close Tolerance Screw
- 5305-00-186-9221 MPN SFT22-4A30Close Tolerance Screw
- 5305-00-459-9865 MPN 64228V4-15Close Tolerance Screw
- 5305-00-505-3225 MPN LS15234C3-30Close Tolerance Screw
- 5305-00-516-6216 MPN HT4024L5-19Close Tolerance Screw
- 5305-01-023-8192 MPN NAS1191-04T3BSocket Head Cap Screw
- 5305-01-032-3459 MPN NAS1221-08E10Machine Screw
- 5305-01-033-2661 MPN 12705L-4F-9DShoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-195-1597 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
73586D-5-35 | Sps Technologies, Llc |
73586D-5-35 | Sps Technologies, Llc |