NSN 5306-01-195-3263
Close Tolerance Hex Head Bolt
Between 2.572 inches and 2.602 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number LD111-0026-0831 for national stock number 5306011953263.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-195-3263.
-
MPN or Model
LD111-0026-0831
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.674 inches -
Fastener Length
Between 2.572 inches and 2.602 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-099-2732 MPN 66-16046-1Aileron Trailin Rib
- 1560-00-328-6101 MPN 161-48282Aircraft Access Cover
- 1560-00-533-2171 MPN 77-58532Hydraulic Line Assy
- 1560-01-046-7699 MPN 265-313016-4Longeron
- 1680-01-174-3103 MPN L4800106-031Aerial Refueling Fitting
- 5930-01-203-3665 MPN LE452-0004-0012Rotary Switch
- 1560-01-222-9591 MPN 288-220110-21Elevator Trim Door
- 5985-01-225-2966 MPN LE413-0278-0015Waveguide Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-195-3263 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0831 | Boeing Company, The |