NSN 5306-01-195-5812
Coaxial Connector
Between 1.286 inches and 1.316 inches fastener length, spline extended washer head style, 0.267 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number S343-5-12 for national stock number 5306011955812.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-195-5812.
-
MPN or Model
S343-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.526 inches and 0.576 inches -
Fastener Length
Between 1.286 inches and 1.316 inches -
Head Style
Spline extended washer -
Head Height
0.267 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-207-9339 MPN BACS12CK3U10Machine Screw
- 5305-01-413-8477 MPN VCL0009-7-30Close Tolerance Screw
- 5306-00-508-2832 MPN VFK100G-07040Shear Bolt
- 5306-01-044-2995 MPN VAL23607-4D27Shoulder Bolt
- 5306-01-044-6562 MPN GB511BY3M1Close Tolerance Bolt
- 5306-01-045-4195 MPN VAL23608-4-16Shoulder Bolt
- 5306-01-046-0508 MPN VAL23608-4D15Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-195-5812 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S343-5-12 | Huck International, Inc. |
ST3M753-5-12 | Boeing Company, The |
ST3M753-5-12 | Sps Technologies, Llc |
ST3M753-5-12 | Alcoa Global Fasteners, Inc. |
VFK600-5-12 | Valley-todeco, Inc. |
AIC763-5-12 | Sps Technologies, Llc |
PBF1267-5-12 | Sps Technologies, Llc |
MB156-5-12 | Hi-shear Corporation |
MB156-5-12 | Lisi Aerospace Canada Corp |
S343-5-12 | Huck Intl Inc |
VS3190-5-12 | Arconic Global Fasteners & Rings, |
122897-5-12 | Sps Technologies, Llc |
VS3190-5-12 | Alcoa Global Fasteners, Inc. |
GS1032-5-12 | B & B Specialties Inc. |