NSN 5306-01-196-0405
Coaxial Connector
Between 2.395 inches and 2.425 inches fastener length, double hexagon w/hole head style, between 0.434 inches and 0.454 inches head height, width between flats: between 0.616 inches and 0.627 inches .
Manufacturer part number LD111-0021-0924 for national stock number 5306011960405.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-196-0405.
-
MPN or Model
LD111-0021-0924
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.885 inches and 0.935 inches -
Fastener Length
Between 2.395 inches and 2.425 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.434 inches and 0.454 inches -
Width Between Flats
Between 0.616 inches and 0.627 inches -
Extended Washer Diameter
Between 0.928 inches and 0.938 inches -
Extended Washer Thickness
Between 0.123 inches and 0.143 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-961-1721 MPN NA5-72391-1Sensitive Switch
- 5935-01-176-0247 MPN LE482-0004-0412Electrical Connector Cable Clamp
- 5935-01-176-0252 MPN LE482-0004-0110Electrical Connector Cable Clamp
- 1560-01-225-2951 MPN L3223810-031Aircraft Access Door
- 4920-01-248-2358 MPN R-TBD-3952Test Adapter
- 1560-01-252-9650 MPN L5351904-031Aircraft Fluid Manifold
- 1560-01-299-1165 MPN L1800123-006Aircraft Skin
- 1560-01-316-7179 MPN L3223888-025Aircraft Structural Panel
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-196-0405 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0924 | Boeing Company, The |