NSN 5306-01-197-1578
Close Tolerance Hex Head Bolt
Between 1.640 inches and 1.670 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0026-0519 for national stock number 5306011971578.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-197-1578.
-
MPN or Model
LD111-0026-0519
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.492 inches -
Fastener Length
Between 1.640 inches and 1.670 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-185-1912 MPN 140-33512-1Main Landing Gear Stop Assembly
- 5930-00-505-8877 MPN 175-54332-10Sensitive Switch
- 1560-01-173-5630 MPN L4850135-005Aircraft Fluid Manifold
- 1560-01-173-9704 MPN L1700009-003Aircraft Structural Component Bracket
- 1560-01-175-1918 MPN L8800268-001Pto Shaft Ring Seal
- 1680-01-182-6325 MPN L5248011-001Reaction Cylinder Assembly
- 5935-01-193-5530 MPN ES27467T21F35SBElectrical Plug Connector
- 4920-01-211-0168 MPN R-TBD-3157Aircraft Maintenance Rigging Kit
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-197-1578 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0519 | Boeing Company, The |