NSN 5306-01-197-6564
Wheel Bolt
Between 0.990 inches and 1.010 inches fastener length, hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number MS9494-07 for national stock number 5306011976564.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-197-6564.
-
MPN or Model
MS9494-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.905 inches -
Fastener Length
Between 0.990 inches and 1.010 inches -
Head Style
Hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
End Application
Spec item -
Thread Diameter
0.500 inches -
Grip Length
Between 0.105 inches and 0.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-050-2308 MPN MS00355431-3Lug Terminal
- 5935-00-053-4405 MPN MS3103-24-28SElectrical Receptacle Connector
- 5905-00-108-4822 MPN MS35046-21Nonprecision Wire Wound Variable Resistor
- 5940-00-115-5005 MPN MS20659-154Lug Terminal
- 5935-00-163-6969 MPN MS3107A20-27PXElectrical Plug Connector
- 5935-00-195-8967 MPN MS3108A18-1SElectrical Plug Connector
- 5985-00-212-7420 MPN MS25051-1Antenna Support Sleeve
- 5935-00-359-9018 MPN MS3417-10NElectrical Connector Cable Clamp
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-197-6564 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9494-07 | Military Standards |
MS9494-07 | Military Standards |