NSN 5306-01-198-4156
Coaxial Connector
Between 1.703 inches and 1.750 inches fastener length, hexagon head style, between 0.178 inches and 0.198 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number NAS563C55 for national stock number 5306011984156.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-198-4156.
-
MPN or Model
NAS563C55
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.581 inches and 1.720 inches -
Fastener Length
Between 1.703 inches and 1.750 inches -
Head Style
Hexagon -
Head Height
Between 0.178 inches and 0.198 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.1670 inches and 0.1900 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.030 inches and 0.060 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas563 professional/industrial association standard
More from these suppliers
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5940-01-396-9984 MPN NAS1063A10-TB105ATerminal Board Marker Strip
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5940-01-425-7395 MPN NAS1063A11-324Terminal Board Marker Strip
- 5305-00-004-3170 MPN NAS1156-64Close Tolerance Screw
- 5305-00-051-9104 MPN MS24677-91Socket Head Cap Screw
- 5305-00-059-2490 MPN MS51976-46Setscrew
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-198-4156 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS563C55 | National Aerospace Standards |