1-321-802-5889
Email Us

NSN 5306-01-199-1262

Close Tolerance Hex Head Bolt

About this product

Two holes 90 degrees apart.

Manufacturer part number PBF1426-10-15 for national stock number 5306011991262.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-199-1262.

  • MPN or Model

    PBF1426-10-15

  • Schedule B
    8105.90.0000 (Cobalt, wrought, and articles thereof)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.886 inches and 0.953 inches
  • Fastener Length
    Between 1.833 inches and 1.880 inches
  • Head Style
    Spline drive shear head
  • Head Height
    0.350 inches
  • Width Between Flats
    Between 0.970 inches and 0.978 inches
  • Hole Diameter
    Between 0.065 inches and 0.074 inches
  • Grip Diameter
    Between 0.6235 inches and 0.6240 inches
  • Shank Unthreaded Hole Diameter
    0.141 inches first hole and 0.146 inches first hole
  • Thread Diameter
    0.625 inches
  • Grip Length
    Between 0.927 inches and 0.947 inches
  • Hole Quantity
    1
  • Hole Type
    Drilled
  • Thready Qty Per Inch (tpi)
    18
  • Min. Tensile Strength (psi)
    145000 pounds per square inch
  • Hole Configuration Style
    Spline
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    1.579 inches first hole and 1.636 inches first hole
  • Material
    Cobalt comp mp-35-n
  • Material Specification
    Ams 5844 assn standard single material response
  • Surface Treatment
    Passivate
  • Surface Treatment Specification
    Qq-p-35 federal specification single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-199-1262 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011991262

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
PBF1426-10-15 Sps Technologies, Llc
81921-10-15 Sps Technologies, Llc
3M1046-10-15 Boeing Company, The
10116145 Nimikkeistokeskus Ncb Finland
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.