NSN 5306-01-199-2271
Wheel Bolt
Between 7.188 inches and 7.234 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number AN6-71A for national stock number 5306011992271.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-199-2271.
-
MPN or Model
AN6-71A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.610 inches and 0.688 inches -
Fastener Length
Between 7.188 inches and 7.234 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 6.546 inches and 6.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-8168 MPN AN3102A22-19PElectrical Receptacle Connector
- 5935-00-280-1914 MPN AN3102A20-22PElectrical Receptacle Connector
- 5935-00-280-2351 MPN AN3057-40AElectrical Connector Cable Clamp
- 5975-00-553-7151 MPN AN781-2Electrical Cable Nipple
- 4820-00-684-0244 MPN AN6277-10Shuttle Valve
- 5935-01-145-9861 MPN AN3106A14S2PXElectrical Plug Connector
- 5305-00-079-1159 MPN AN526DD832R8Machine Screw
- 5305-00-082-6788 MPN AN505DD416R11Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-199-2271 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN6-71A | Aeronautical Standards Group |