NSN 5306-01-199-8403
Close Tolerance Hex Head Bolt
Between 4.048 inches and 4.078 inches fastener length, undercut hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6205-58 for national stock number 5306011998403.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-199-8403.
-
MPN or Model
NAS6205-58
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.430 inches -
Fastener Length
Between 4.048 inches and 4.078 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 3.615 inches and 3.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Material Specification
Nas4002 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205 professional/industrial association standard
More from these suppliers
- 5975-00-255-2428 MPN MS3368-4-CDElectrical Components Tiedown Strap
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5935-01-613-6861 MPN 500910-00Electrical Connector End Seal Plug
- 5305-00-007-6187 MPN NAS1100E08-32Machine Screw
- 5305-00-150-3187 MPN MS27039DD4-18Machine Screw
- 5305-00-151-5662 MPN MS27039-5-16Machine Screw
- 5305-00-170-2931 MPN NAS1352C8-10Socket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-199-8403 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-58 | National Aerospace Standards |
Stock Check
- NS: 37
- NE: 312