NSN 5306-01-200-1176
Close Tolerance Hex Head Bolt
Between 1.080 inches and 1.100 inches fastener length, double hexagon extended washer head style, between 0.373 inches and 0.393 inches head height, width between flats: 0.438 inches .
Manufacturer part number J816P019A for national stock number 5306012001176.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-200-1176.
-
MPN or Model
J816P019A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.669 inches and 0.699 inches -
Fastener Length
Between 1.080 inches and 1.100 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.373 inches and 0.393 inches -
Width Between Flats
0.438 inches -
Extended Washer Diameter
Between 0.552 inches and 0.572 inches -
Extended Washer Thickness
Between 0.090 inches and 0.100 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.401 inches and 0.406 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
C50tf13 cl-b, fscm 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-487-6920 MPN 856A1366G02Power Management Contro Test Set
- 5306-01-187-3834 MPN J644P14DMachine Bolt
- 5320-01-190-1521 MPN 650-772-002-0Rivet
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-200-1176 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J816P019A | Cfm International, Inc. |
J816P019A | Morton Grinding, Inc. |
J8 6P019A | Cfm International, Inc. |