NSN 5306-01-202-3840
Coaxial Connector
1.570 inches fastener length, 0.219 inches head height, between 0.679 inches and 0.690 inches width between flats, grip diameter: between 0.2480 inches and 0.2530 inches .
Manufacturer part number 69-36705-1 for national stock number 5306012023840.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-202-3840.
-
MPN or Model
69-36705-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.300 inches -
Fastener Length
1.570 inches -
Head Height
0.219 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.2480 inches and 0.2530 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
1.270 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.451 inches first hole -
Material
Steel -
Material Specification
Nas1107 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-351-6081 MPN 66-1356Torque Tube End Cap
- 1560-01-025-6264 MPN 69-5394-29Aircraft Channel
- 1560-00-073-4012 MPN 107C2354-2Piston
- 5905-00-308-5544 MPN BACRH14U10202BFFilm Fixed Resistor
- 1560-00-332-2736 MPN 9-66598Aircraft Structural Component Support
- 1680-00-343-4140 MPN 90-2968Boom Hoist Bushing
- 1560-00-474-7179 MPN 35-15941-3Aircraft Structural Plate
- 5950-00-556-2598 MPN 10-2145-6Power Autotransformer Transformer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
![Mechanic Bill explains Coaxial Connector](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-202-3840 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
69-36705-1 | Boeing Company, The |
69-36705-1 | The Boeing Company |
Stock Check
![](/public/images/partscage_shelf3.png)