NSN 5306-01-203-0904
Close Tolerance Hex Head Bolt
Between 1.890 inches and 1.920 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number LD111-0026-0523 for national stock number 5306012030904.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-203-0904.
-
MPN or Model
LD111-0026-0523
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.492 inches -
Fastener Length
Between 1.890 inches and 1.920 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
1.438 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-262-3874 MPN 3M707-5-7-6-1Close Tolerance Screw
- 5305-01-512-8364 MPN 3M1170D4-18AClose Tolerance Screw
- 5305-01-512-8416 MPN 3M1170C3-9AFClose Tolerance Screw
- 5305-01-513-8897 MPN VCL0010-6-16Close Tolerance Screw
- 5306-01-052-1185 MPN VAL22034-8F15Shear Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-131-2907 MPN 3M881V-3-23Assembled Washer Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-203-0904 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0523 | Boeing Company, The |
LD111-0026-0523 | Valley-todeco, Inc. |
LD111-0026-0523 | Sps Technologies, Llc |
LD111-0026-0523 | Huck International, Inc. |
LD111-0026-0523 | J.w. Manufacturing, Inc |
LD111-0026-0523 | Sps Technologies, Llc |
LD111-0026-0523 | Abounding Security Inc |
LD111-0026-0523 | Hi-shear Corporation |
LD111-0026-0523 | Sps Technologies, Llc |
LD111-0026-0523 | Alcoa Global Fasteners, Inc. |