NSN 5306-01-204-3303
Coaxial Connector
39.25 millimeters fastener length, spline extended washer head style, between 16.25 millimeters and 16.75 millimeters width between flats, extended washer diameter: between 16.25 millimeters and 16.75 millimeters .
Manufacturer part number SWM10-10-20 for national stock number 5306012043303.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-204-3303.
-
MPN or Model
SWM10-10-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
19.25 millimeters -
Fastener Length
39.25 millimeters -
Head Style
Spline extended washer -
Width Between Flats
Between 16.25 millimeters and 16.75 millimeters -
Extended Washer Diameter
Between 16.25 millimeters and 16.75 millimeters -
Grip Diameter
Between 9.9620 millimeters and 9.9870 millimeters -
Thread Diameter
10.0 millimeters -
Grip Length
Between 19.25 millimeters and 20.00 millimeters -
Thread Pitch In Millimeters
1.5 -
External Thread Tolerance Class
M10x1.5-4h6h -
Surface Finish
32.0 microinches -
Material
Steel -
Material Specification
Mil-s-5626 military specification single material response or mil-s-6049 military specification single material response or mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification all treatment responses -
Thread Series Designator
Iso s -
Specification Data
73197-sw-10-10-20 manufacturers standard
More from these suppliers
- 5305-00-151-7948 MPN HT239PB4-5Close Tolerance Screw
- 5305-00-192-0428 MPN HT3N-7PClose Tolerance Screw
- 5305-00-235-2241 MPN ST3M605-4-9Close Tolerance Screw
- 5305-00-345-2366 MPN HT4024L4-10Close Tolerance Screw
- 5305-00-420-0686 MPN NAS11132-5Close Tolerance Screw
- 5305-00-802-0574 MPN 51B221-4Close Tolerance Screw
- 5305-00-824-8577 MPN NAS1204-10Close Tolerance Screw
- 5305-00-838-5388 MPN NAS1101C02-12Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-204-3303 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SWM10-10-20 | Hi-shear Corporation |
SWM10-10-20 | Lisi Aerospace Canada Corp |
SWM10-10-20 | Alcoa Fastening Systems |