NSN 5306-01-205-4987
Close Tolerance Hex Head Bolt
Between 5.194 inches and 5.244 inches fastener length, undercut hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number BACB30NE5-76 for national stock number 5306012054987.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-205-4987.
-
MPN or Model
BACB30NE5-76
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.484 inches -
Fastener Length
Between 5.194 inches and 5.244 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 4.740 inches and 4.760 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-173-3599 MPN LD111-0044-2409Close Tolerance Screw
- 5305-01-332-7571 MPN LS15264-3-8Machine Screw
- 5305-01-412-1937 MPN 3M1169D3-3AFClose Tolerance Screw
- 5305-01-600-3670 MPN 3M1275E6D8AMachine Screw
- 5306-00-186-3086 MPN 3023T08P01Tee Head Bolt
- 5306-00-224-9320 MPN VFK100G-09030Shear Bolt
- 5306-01-052-1184 MPN VAL22034-7G15Shear Bolt
- 5306-01-052-7624 MPN VCB0008C4-1580Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-205-4987 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE5-76 | Federal Manufacturing Corporation |
BACB30NE5-76 | Sps Technologies, Llc |
BACB30NE5-76 | Valley-todeco, Inc. |
BACB30NE5-76 | Arconic Global Fasteners & Rings, |
BACB30NE5-76 | Sps Technologies, Llc |
BACB30NE5-76 | Sps Technologies, Llc |
BACB30NE5-76 | The Boeing Company |
BACB30NE5-76 | Alcoa Global Fasteners, Inc. |
BACB30NE5-76 | Huck International, Inc. |
BACB30NE5-76 | Sps Technologies, Llc |
BACB30NE5-76 | Huck Intl Inc |