NSN 5306-01-207-1695
Coaxial Connector
Between 0.962 inches and 1.012 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6704H9 for national stock number 5306012071695.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-207-1695.
-
MPN or Model
NAS6704H9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.410 inches and 0.440 inches -
Fastener Length
Between 0.962 inches and 1.012 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-051-4505 MPN MS51973-31Setscrew
- 5305-00-052-5694 MPN NAS1352-04H4Socket Head Cap Screw
- 5305-00-058-2898 MPN NAS1142E2Close Tolerance Screw
- 5305-00-115-1377 MPN NAS1301-6-6Assembled Washer Screw
- 5305-00-150-0810 MPN NAS1100E08-46PMachine Screw
- 5305-00-151-0147 MPN NAS207-30Machine Screw
- 5305-00-151-5680 MPN NAS1218-08-9PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-207-1695 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704H9 | National Aerospace Standards |
NAS6704H9 | National Aerospace Standards |
NAS6704H9 | National Aerospace Standards |