NSN 5306-01-207-6974
Coaxial Connector
Between 1.462 inches and 1.512 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1224-17L for national stock number 5306012076974.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-207-6974.
-
MPN or Model
NAS1224-17L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.410 inches and 0.440 inches -
Fastener Length
Between 1.462 inches and 1.512 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1224 professional/industrial association standard
More from these suppliers
- 5935-00-160-2471 MPN NAS1666-16Electrical Connector Cable Clamp
- 5305-00-060-9820 MPN NAS221C31Machine Screw
- 5305-00-071-1764 MPN MS90725-104Hexagon Head Cap Screw
- 5305-00-150-0804 MPN NAS1131E8Close Tolerance Screw
- 5305-00-156-2326 MPN MILS7839Machine Screw
- 5305-00-180-1433 MPN MILS7839Machine Screw
- 5305-00-205-3920 MPN NAS333CPA62Close Tolerance Screw
- 5305-00-243-7157 MPN MS16995-51BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-207-6974 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1224-17L | National Aerospace Standards |