NSN 5306-01-207-7530
Coaxial Connector
Between 3.797 inches and 3.827 inches fastener length, double hexagon w/hole head style, 0.234 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number LD111-0021-0453 for national stock number 5306012077530.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-207-7530.
-
MPN or Model
LD111-0021-0453
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.500 inches -
Fastener Length
Between 3.797 inches and 3.827 inches -
Head Style
Double hexagon w/hole -
Head Height
0.234 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
3.312 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-074-2204 MPN 276-484007Tail Fairing Cone
- 1560-00-185-1619 MPN 140-31026Cockpit Acce Handle
- 1560-00-246-0803 MPN 140-39060-1Aircraft Access Door
- 1560-00-325-0847 MPN 140-31043Access Door Lock Hook
- 1560-00-341-6438 MPN 66-24011Rudder Rib Assy
- 1560-00-386-7793 MPN 152-31802-50Com Canopy Assembly
- 1560-00-476-1598 MPN 265-300039-502Fuselage Door Assembly
- 1680-00-632-0873 MPN 192-48776-3Refue Probe Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-207-7530 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0453 | Boeing Company, The |