NSN 5306-01-209-7190
Close Tolerance Hex Head Bolt
Between 1.014 inches and 1.034 inches fastener length, double hexagon extended washer head style, between 0.248 inches and 0.268 inches head height, width between flats: 0.250 inches .
Manufacturer part number J413P024A for national stock number 5306012097190.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-209-7190.
-
MPN or Model
J413P024A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.540 inches and 0.570 inches -
Fastener Length
Between 1.014 inches and 1.034 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.248 inches and 0.268 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.464 inches and 0.474 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-060-9768 MPN R984P1002AWire Wound Fixed Resistor
- 1680-00-118-8321 MPN 1C2761P19Foot
- 4920-00-147-3694 MPN 1C6291G01Aircraft Engine Maintenance Fixture
- 4920-00-226-0223 MPN 21C6031G01Interface Device Adapter Assembly
- 4920-00-226-0422 MPN 1C6329G01Aircraft Engine Maintenance Fixture
- 5905-00-241-8523 MPN R984P2250AInductive Wire Wound Fixed Resistor
- 4920-00-278-9470 MPN 21C2366P010Tailpipe Extension
- 1560-00-520-2727 MPN 9648M30G32Thrust Blocker Assy
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-209-7190 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J413P024A | General Electric Company |
J413P024A | M.s. Aerospace Inc. |
J413P024A | J.w. Manufacturing, Inc |
J413P024A | Acufast Aircraft Products Inc. |