NSN 5306-01-209-7191
Close Tolerance Hex Head Bolt
Furnish with sleeve 0.1885 in. Min and 0.1889 in. Max inside diameter 0.415 in. Min and 0.425 in. Max outside diameter 0.160 in min and 0.170 in max thickness. Sleeve material inconel 718.
Manufacturer part number 9538M61G01 for national stock number 5306012097191.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-209-7191.
-
MPN or Model
9538M61G01
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.540 inches and 0.570 inches -
Fastener Length
Between 0.795 inches and 0.815 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.248 inches and 0.268 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.245 inches and 0.255 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-034-9007 MPN 1C2771-100P1Rear Stator Adapter Support
- 4920-00-062-7045 MPN 1C2880-135Portable Test Cell Indicator
- 1680-00-118-8319 MPN 1C2761P26Hole Attachment
- 4920-00-420-2508 MPN 1C5852G01Fuel Control System Components Test Station
- 4920-00-707-4532 MPN 1C2877P21Test Adapter
- 4920-00-896-2273 MPN 1C5415-2G2Aircraft Maintenance Fixture
- 4920-00-908-1246 MPN 21C2384-143Stator Indicator
- 4920-00-955-0942 MPN 1C2620G2Shaft Protector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-209-7191 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9538M61G01 | General Electric Company |