NSN 5306-01-215-3994
Close Tolerance Hex Head Bolt
Between 1.233 inches and 1.253 inches fastener length, double hexagon w/hole head style, between 0.248 inches and 0.268 inches head height, width between flats: 0.250 inches .
Manufacturer part number J413P038A for national stock number 5306012153994.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-215-3994.
-
MPN or Model
J413P038A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.540 inches and 0.570 inches -
Fastener Length
Between 1.233 inches and 1.253 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.248 inches and 0.268 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
Between 0.365 inches and 0.385 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.683 inches and 0.693 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-076-9400 MPN 1C5432G1Aircraft Maintenance Fixture
- 5935-00-283-7197 MPN 21C1710-323Electrical Plug Connector
- 4920-00-474-6296 MPN 21C5263G01Bearing Hou Fixture
- 4920-00-571-5599 MPN 1C2460Dummy Bearing
- 5905-00-575-4318 MPN R984P9001AWire Wound Fixed Resistor
- 4920-00-713-2266 MPN 21C749Labyrinth Protector
- 5935-00-721-0917 MPN 21C1709-117Electrical Connector Cover
- 5905-00-792-5976 MPN R999P0860AInductive Wire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-215-3994 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J413P038A | General Electric Company |