NSN 5306-01-215-5334
Close Tolerance Hex Head Bolt
Between 2.560 inches and 2.590 inches fastener length, hexagon head style, between 0.115 inches and 0.135 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 9109M81P05 for national stock number 5306012155334.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-215-5334.
-
MPN or Model
9109M81P05
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.360 inches and 0.420 inches -
Fastener Length
Between 2.560 inches and 2.590 inches -
Head Style
Hexagon -
Head Height
Between 0.115 inches and 0.135 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.052 inches and 0.058 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 2.170 inches and 2.200 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.390 inches and 2.420 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-038-0783 MPN 21C2635G001Aircraft Maintenance Fixture
- 4920-00-631-2375 MPN 1C2729Turbine Rot Support
- 5935-00-688-4026 MPN 21C1534-076Electrical Connector Cable Clamp
- 4920-00-723-7568 MPN 21C439-16Pressure Probe
- 4920-01-013-9909 MPN 1C6782G01Interface Device Accessory Set
- 4920-01-088-4599 MPN 21C8102G02Frame Trunnion Plates
- 4920-01-147-1738 MPN 3C3201G02Interface Device Adapter Assembly
- 4920-01-200-6427 MPN 3C3504G01Low Pressure Turbine Support
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-215-5334 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9109M81P05 | General Electric Company |