NSN 5306-01-218-2289
Coaxial Connector
Between 2.653 inches and 2.778 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708DU35 for national stock number 5306012182289.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-218-2289.
-
MPN or Model
NAS6708DU35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.653 inches and 2.778 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.681 inches and 2.731 inches first hole -
Material
Iron alloy -
Material Specification
Ams 5731 assn standard 1st material response or ams 5737 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 5305-00-007-9892 MPN NAS1102E04-12Machine Screw
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-053-0614 MPN NAS1100C04-14Machine Screw
- 5305-00-053-5458 MPN NAS1402-42Machine Screw
- 5305-00-058-8627 MPN MS24671-13Socket Head Cap Screw
- 5305-00-058-9377 MPN MS51977-49Setscrew
- 5305-00-059-8248 MPN MS35214-23Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-218-2289 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708DU35 | National Aerospace Standards |
BACB30LM8DU35 | The Boeing Company |