NSN 5306-01-218-3987
Close Tolerance Hex Head Bolt
Between 2.486 inches and 2.516 inches fastener length, undercut hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number NAS6210-30D for national stock number 5306012183987.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-218-3987.
-
MPN or Model
NAS6210-30D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.626 inches -
Fastener Length
Between 2.486 inches and 2.516 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.274 inches and 2.314 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6210 professional/industrial association standard
More from these suppliers
- 5940-00-926-0022 MPN NAS705C4Stud Terminal
- 5940-01-425-6043 MPN NAS1063A5-439Terminal Board Marker Strip
- 5940-01-425-7391 MPN NAS1063A11-316Terminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393C00-3Machine Screw
- 5305-00-008-5886 MPN NAS1102E06-8PMachine Screw
- 5305-00-019-9468 MPN NAS1351-3LN10Socket Head Cap Screw
- 5305-00-147-3246 MPN MS51861-29CTapping Screw
- 5305-00-151-2362 MPN MS35198-30Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-218-3987 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-30D | National Aerospace Standards |